Configure proxies in the username

For Residential and Mobile, all settings live in the login. The bot builds it for you, but you can edit it by hand: the next connection uses the new settings.

• No need to get data in the bot again.
• The password stays the same.
• Old lines keep their own settings, all of them share the traffic.

ISP and Datacenter have a fixed IP and no login parameters.

The line#

pool.wissproxy.com:10000:LOGIN_c_US_s_a1b2_ttl_10m:PASSWORD

• Host – pool.wissproxy.com, the same for everyone.
• Port – any from 10000 to 10999. HTTP and SOCKS5 work on the same port.
• Login – your login plus the parameters after it. The login without parameters is everything before the first _.
• Password – the same with any parameters.

In the examples below, replace LOGIN and PASSWORD with your own.

Parameters#

Each parameter is written as _key_value at the end of the login.

Skip the parameters you do not need and keep the rest in the bot's order:

LOGIN_c_COUNTRY_sd_REGION_city_CITY_asn_PROVIDER_zip_ZIP_os_OS_s_SESSION_ttl_TIME

Values may contain only Latin letters and digits, plus - in a city or ZIP. The whole login must stay within 128 characters. Old lines with _isp_ and a number keep working: that is a provider by an internal code.

How the IP changes#

• _s_ – any name of Latin letters and digits, for example _s_job1. The same name gives the same IP, a new name gives a new IP.
• _ttl_ – a number and a unit: s seconds, m minutes, h hours. For example _ttl_30s, _ttl_10m, _ttl_1h. The bot offers _ttl_1m to _ttl_24h.
• Idle – a session with no traffic closes after 60 minutes. The next request with the same _s_ gets a new IP.
• Sticky – a home or mobile device stands behind the IP. If it goes offline, the IP changes or the request returns an error.
• Without _s_ – a connection that a program keeps open uses one IP until it closes.

Geo#

• Country – _c_ and a two-letter code: _c_US, _c_DE, _c_FR. The United Kingdom is GB, not UK. Without _c_ the IP comes from any country.
• Region – _sd_ and a numeric code: _sd_2928 is Texas. A name like _sd_Texas or an abbreviation like _sd_TX returns 407. US state codes are below. For other countries, pick the region in the bot, tap Get data, and take the number after _sd_.
• City – _city_ and the English name joined with -: _city_Dallas, _city_New-York. Add the country too: the same city names exist in different countries.
• Provider – _asn_ and the autonomous system number, digits only. With letters, _asn_AS7922 returns 407. Available providers are in the bot: Location → Provider, for Mobile Operator.
• ZIP – _zip_ and a postal code, only with a country: _c_US_zip_10001. Capital letters, spaces become -: _c_CA_zip_M5V. The gateway picks the nearest IP, so the exit postal code may differ.

Every filter narrows the IP choice. Country, region, and city together usually work. A city together with a ZIP or provider often returns 503. Got 503 – remove filters one by one, starting with the narrowest.

Threads#

• Ports – each port from 10000 to 10999 is a separate channel, up to 1000 IPs at once.
• Sessions – with _s_, the session sets the IP, not the port. One session on different ports gives one IP. Give each thread its own session: _s_job1, _s_job2.
• Bot export – every line already has its own port and its own session.
• Traffic – shared by all lines of the package. Changing parameters costs nothing.

Examples#

The same line in different formats:

socks5://LOGIN_c_US_sd_2928_s_tx1_ttl_30m:PASSWORD@pool.wissproxy.com:10000
http://LOGIN_c_US_sd_2928_s_tx1_ttl_30m:PASSWORD@pool.wissproxy.com:10000

pool.wissproxy.com:10000:LOGIN_c_US_sd_2928_s_tx1_ttl_30m:PASSWORD

LOGIN_c_US_sd_2928_s_tx1_ttl_30m:PASSWORD:pool.wissproxy.com:10000

Check#

curl -x 'http://LOGIN_c_US_sd_2928:PASSWORD@pool.wissproxy.com:10000' https://ipinfo.io/json

The response shows the exit IP, country, region, and city. Run it twice: without _s_ the IP changes, with _s_ it stays the same. Different IP lookup services may place the same address in neighbouring cities.

Errors#

In the first 10 minutes after purchase, lines may return 503: the package is being connected. With _s_, the first request occasionally gets 503 if the device has just gone offline. Enable retries on error in your program.

The _rotm_ parameter#

The bot does not set it. It defines what happens when the session device goes offline. It goes at the very end of the login, only together with _s_.

• _rotm_0 – switch to another device right away. This is the gateway default.
• _rotm_1 – wait about 5 seconds. Requests may get errors meanwhile.
• _rotm_2 – never switch the device. The line stops working until you change _s_. For accounts where an IP change is worse than an error.

How this maps to the bot#

The password changes only through Reset settings → Password. After that, all exported lines stop working.